Home > Product > Transmitter Monitoring Equipment > Transmitter 1+1 Main/Backup Switching Control System > “1+1” host/backup integrated Coaxial Switcher

“1+1” host/backup integrated Coaxial Switcher

Model:ZHC926I

Specifications:Professional for FM Station

Product introduction:The ZHC926I series host/backup switching integrated machine is a special equipment designed for the "1+1" master/backup switching system of broadcast and television transmitting stations, and is used to control the manual or automatic switching

“1+1” host/backup integrated

coaxial switcher 


Product Description

The ZHC926I series host/backup switching integrated machine is a special equipment designed for the "1+1" master/backup switching system of broadcast and television transmitting stations, and is used to control the manual or automatic switching of the host/backup transmitter. Compared with the traditional host-backup switching equipment or system, the host/backup switching integrated machine has the advantages of a built-in coaxial switcher, no need transmitter communication protocol, it’s small size and convenient for installation.

In automatic switching mode, the all-in-one will automatically detect the working status of the host transmitter. When the output power of the host is lower than the preset switching threshold, the all-in-one will control the built-in coaxial switch and the power supply of the host and backup transmitters, and automatically switch to the backup The transmitter works to achieve uninterrupted broadcast.

In manual switching mode, you can manually operate through the panel switch to select the host or backup transmitter to complete the switching control of the coaxial switch and the power of the host and backup transmitters.

The ZHC926I series host and backup switching integrated machines are divided into two RF power levels: 300W and 1KW.


ZHC926I-300W front & back panel

926i EN1 - 副本.jpg

ZHC926I-1KW front & back panel

926i EN2 - 副本.jpg


Technical Features

l  The switching threshold is calibrated by the user

l  LCD real-time display of the working status of the host and backup

l  Built-in coaxial switcher, easy to install

l  The function of maintaining the host/backup state after power failure

l  Remote monitoring of all-in-one machine can be realized through remote interface

l  Using high-speed MCU processor control, stable and reliable performance

l  Two power levels: 300W (N connector, 220V power supply for transmitter)

1KW (7/16” connector, transmitter 220V or 380V power supply)

l  Applicable to any brand transmitter, without transmitter communication protocol

 

Working Principle Diagram

926i diagram.jpg

 

Main Technical Specifications

Electrical parameter table

Transmitter power

ZHC926I-300W

0300W (Transmitter 220V)

ZHC926I-1KW

01KW  (Transmitter 220V or 380V)

Host transmitter RF detection   output range

-5+10dBm

Switching time

User-defined

Communication Interface

RS232; TCP/IP; SMS modem

Power supply

AC220V/50Hz

Power consumption

20W


Physical properties table

RF input detection interface

BNC

RF input and output

ZHC926I-300W: N type

ZHC926I-1KW: 7/16”DIN female

RS232 interface

DB9

SMS modem interface

DB9

Ethernet interface

RJ45

Chassis standard

19 inch

Chassis size

2U(440mm×88mm×445mm)

equipment weight

3.5KG

Operating environment   temperature

—15~+50

Relative humidity

95%

 

message