Home >Products >FM Radio Transmitter > 1KW FM Transmitter > New 1000W FM Transmitter

New 1000W FM Transmitter

Model:ZHC618F-1000W/T

Specifications:-

Price:$4120

Introduce:This 1KW FM Transmitter uses new DSP + DDS digital technology for FM radio modulation board. It uses the new generation of high efficiency RF LDMOS transistor; low loss lumped filter; high reliability switching power supply and other components all been installed in a 2U height; 19-inch standard chassis. It reduced connection cables between components in common transmitter, so it’s higher reliability and more easy for operation. The Modular design which form the compact and superior performance of the new 1KW FM radio transmitter. It has unparalleled technical indicators, the audio effects close to CD-quality.

ZHC618F-1000W/T Compact FM Stereo Transmitter


Introduction:

This 1KW FM Transmitter uses new DSP + DDS digital technology for FM radio modulation board. It uses the new generation of high efficiency RF LDMOS transistor; low loss lumped filter; high reliability switching power supply and other components all been installed in a 2U height; 19-inch standard chassis. It reduced connection cables between components in common transmitter, so it’s higher reliability and more easy for operation. The Modular design which form the compact and superior performance of the new 1KW FM radio transmitter. It has unparalleled technical indicators, the audio effects close to CD-quality.

This Transmitter uses modular structure design, it's easy for maintenance and repairing; it's using high reliability; wide band switching power supply which is suitable for global power application; the SMT chip can improve the reliability of this Transmitter.

 

 

Features:

● High performance; high efficiency; high reliability; small size design.

● The entire transmitter be installed in one 2U height; 19 inch; High-quality stainless steel chassis. Compact structure.

● All-digital technology process DSP+DDS, Achieve CD quality perfect sound effect.

● Analog & Digital (AES/EBU) audio signal input directly, Digital can be priority.

● 1KW power amplifier module uses the newest high-efficiency LDMOS transistor (1400W); it’s using microstrip impedance transformation technology; high efficiency & good consistency, easy for maintenance and replacement.

● Power amplifier radiator uses patented technology design, small wind resistance, large cooling area, high thermal conductivity.

● Using long-life German gale axial fan, high air volume, it can ensure long-term stable operation of the Transmitter.

● Power amplifier uses high reliability switching power supply, large amount of redundancy.

● Switching power supply has protection functions of over voltage, over current, under voltage, over temperature, short circuit, phase loss & lightning strike.

● Transmitter has protection functions of VSWR, over power, over temperature, over voltage, over current and lightning strike.

● All technical parameters can be read through the OLED LCD, intuitive and convenient.

● Power control using closed-loop automatic gain control (AGC), it can ensure the stable output power without drift.

● It uses TCP/IP and RS232 remote control interface, it's easy to managed by local PC and remote monitoring.

 

 


Technical Specifications:

1. Frequency Range:             87.0MHz108.0MHz

Setting step 10KHz

2. Output Power                  0~1000W

3. Output power deviation        <± 10%
4. Output power stability         <± 1%

5. Output Load Impedance        50Ω

6. RF Output Interface            7/16"(female)/ 7/8” Flange

7. RF efficiency                   >75%

8. SFDR                          < -70dB
9. High Harmonic                 < -65dB
10. Residual Amplitude Modulation < -50dB

11. Carrier Frequency Precision   ±200Hz

12. Analog Audio Input           -12dBm+8dBm

13. Audio Input Level Gain        -15dB+15dB, step 0.1dB

14. Audio Input Impedance       600Ω, Balance, XLR

15. AES / EBU input impedance   110Ω, Balance, XLR
16. AES / EBU input level         0.2 ~ 10Vpp
17. AES / EBU sample rate        30kHz ~ 96kHz

18. SCA Input                     Unbalance (optional) BNC connector

19. Pre-emphasis                 0μS, 50μS, 75μS (optional)

20. Audio Response               ±0.1dB (30Hz15000Hz)

21. LR channel level difference    <0.1dB (100% modulation)
22. Stereo Separation             ≥50dB  30Hz ~ 15000Hz
23. Stereo S/N ratio               ≥70dB 1KHz, 100% modulation

24. Distortion                     0.1%   30Hz15000Hz

25. Power supply                  AC single-phase 220V / 110V

26. Cooling mode                 Forced Convection

27. Temperature Range:          -5℃~+45

28. Relative humidity             <95%
29. Working Altitude              <4500m

30. Size                           2U, 19-inch standard

483mm(W)×88mm(H)×440mm(D)

31. Weight                        16KG

 

Message